开孔板连接件剪切受力的理论模型
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TU312

基金项目:

国家自然科学基金项目(项目编号)


Theory Model of Shear Transferring for Perfobond Rib Connector
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    根据开孔板连接件的试验破坏形态,分析了孔中有无钢筋两种情况的开孔板连接件破坏机理.根据开孔板连接件的破坏机理,采用理论方法推导了开孔板连接件抗剪承载力的计算方法.通过与试验结果对比,证实本计算方法与其吻合较好,具有较高的精度,可被工程设计使用.

    Abstract:

    According to the failure modes of perfobond rib connector, the failure mechanics of the connector with/without penetrate reinforcement in the hole were carefully analyzed. Based on the failure mechanism of the connectors, the calculation method for computing the shear bearing capacity of perfobond connector was proposed by theoretical approaches. Compared with testing results, the calculation results well matches the test values, which indicates the new calculation method has adequate accuracy and it can be used in engineering design preceeding.

    参考文献
    相似文献
    引证文献
引用本文

苏庆田,许园春,王巍.开孔板连接件剪切受力的理论模型[J].同济大学学报(自然科学版),2013,41(12):1775~1780

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2012-11-20
  • 最后修改日期:2013-09-15
  • 录用日期:2013-06-14
  • 在线发布日期: 2013-12-06
  • 出版日期: