燃料电池汽车动力控制模块水冷系统数值模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TM 911.4

基金项目:


Numerical Simulation of Power Control Module Cooling Plate of Fuel Cell Vehicle
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    设计了动力控制模块的冷却系统,并用两种方案对其进行了计算校核;在动力控制模块冷却系统的关键部件上采用了强化传热措施,并应用Fluent软件对冷却结构进行了数值模拟,根据模拟的结果对冷却结构进行了优化,从而使动力控制模块实际运行情况良好.

    Abstract:

    The cooling system of the power control module was designed,checked and calculated with two schemes.In the cooling system power control module,the enforced heat transfer measures are adopted in the key components and numerical simulation of cooling structure is made by using the fluent software.Based on the simulation results,the cooling structure is optimized,therefore,the power control module operates well.

    参考文献
    相似文献
    引证文献
引用本文

常国峰,许思传,倪淮生.燃料电池汽车动力控制模块水冷系统数值模拟[J].同济大学学报(自然科学版),2009,37(10):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: