基于承插和栓接组合的预制装配式悬臂挡土墙
CSTR:
作者:
作者单位:

1.上海市政工程设计研究总院(集团)有限公司,上海 200092;2.建华建材(中国)有限公司,江苏 镇江 212000;3.上海公路桥梁(集团)有限公司,上海 200433

作者简介:

袁胜强,教授级高工,管理学博士,主要研究方向为道路交通、智能交通、BIM技术研发。 E-mail: yuan_sq@163.com

通讯作者:

华 锋,教授级高工,工学硕士,主要研究方向为道路交通。E-mail:13918917024@139.com

中图分类号:

U417.1+1

基金项目:

上海市交通委员会资助项目(JT2018-KY-002)


Prefabricated Cantilever Retaining Wall Based on Combination of Socket and Bolt Connection
Author:
Affiliation:

1.Shanghai Municipal Engineering Design Research Institute (Group)Co., Ltd., Shanghai 200092, China;2.Jianhua Construction Materials (China) Co., Ltd., Zhenjiang 212000, China;3.Shanghai Road and Bridge (Group) Co., Ltd., Shanghai 200433, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为便于预制装配式悬臂挡土墙的推广及应用,在对国内外研究及应用现状分析基础上,提出了基于承插和栓接组合连接的预制装配式悬臂挡土墙,研究了总体构型、结构计算及安装工艺,从理论分析、试验验证和工程应用三方面进行了论证。提出的基于承插和栓接组合式连接的预制装配式悬臂挡土墙满足结构安全要求,便于预制和安装,施工速度快,工艺完善,具有较大的推广价值。

    Abstract:

    To facilitate the promotion and application of prefabricated retaining walls, this paper analyses current research and application status both domestically and internationally, and proposes a prefabricated cantilever retaining wall that utilizes combined connections using socket and bolt. The overall configuration, structural calculation, and installation process are studied, and three aspects including theoretical analysis, experimental verification, and engineering application are discussed. The proposed prefabricated cantilever retaining wall meets structural safety requirements while offering fast and convenient prefabrication and installation, and has significant value for widespread application.

    参考文献
    相似文献
    引证文献
引用本文

袁胜强,华锋,金忠良,赵勇,赵伟华,林景赐,沈伟.基于承插和栓接组合的预制装配式悬臂挡土墙[J].同济大学学报(自然科学版),2025,53(3):348~354

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2023-07-14
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-04-02
  • 出版日期:
文章二维码