Research and Development of OperationBased Parametric Modeling System for Joints of Steel Structures
CSTR:
Author:
Clc Number:

TP391.41

  • Article
  • | |
  • Metrics
  • |
  • Reference [16]
  • |
  • Related
  • | | |
  • Comments
    Abstract:

    To change the situation that the normal constraint-based parametric modeling method is complex, and the modeling efficiency is low, which is difficult for users to master, a parametric steel joint system based on operation was designed. The difference between operation-based parametric modeling and constraint-based parametric modeling in modeling method, system development and the underlying logic was discussed. The principle of operation was introduced. How to write the logical information into the parametric joint was studied and using industry foundation class(IFC) file to save the joint was realized. Operation-based parametric modeling and non-parametric modeling are basically consistent in the modeling method. Compared with constraint-based parametric modeling, operation-based parametric modeling’s efficiency is improved, the parametric information is able to be shared, and the redundant work of developing the similar joints is reduced. At last, the advantages of operation-based parametric system were introduced by examples.

    Reference
    [1] Elliott K. S., Jolly C. K. Design of Connections and Joints[M]. Oxford: Blackwell Science Publ, 2013: 375-545.
    [2] Tekla Official Website[EB/OL]. https://www.tekla.com/.
    [3] 钱磊. Revit族的创建技巧——以圆形风管变径弯头为例[J]. 暖通空调, 2017, 47(11): 83-85.Qian Lei. Creating Skills of Revit Families: Taking Reducing Elbow of Circular Air Duct for Example[J]. Heating Ventilating Air Conditioning, 2017, 47(11):83-85
    [4] Wing Eric. Autodesk Revit Architecture 2012: No Experience Required[M]. John Wiley Sons, 2011.
    [5] Dassault Systèmes launches new SOLIDWORKS app[J]. Reinforced Plastics, 2015, 59(3): 125.
    [6] Liu Gang. Parameterized Mockup Design of PDC Bits Based on Pro/E[J]. Procedia Earth and Planetary Science, 2011, 3: 435-439.
    [7] 王乐文. UG的参数化建模方法[J]. 中小企业管理与科技(上旬刊), 2016, (02): 207.Wang Lewen. Parametric Modeling Based on UG[J]. Management Technology of SME, 2016, (02): 207.
    [8] Lv Yanjie, Zhao Gang. UG-based research and development of 3D pipe layout system of the aircraft engine[J]. Procedia Engineering, 2011, 17: 660-667.
    [9] 孙明玉. 几何约束求解的关键技术研究[D]. 吉林大学, 2016.Sun Mingyu. Research on the Key Techniques of Geometric Constraint Solving [Doctor]: Jilin University; 2016.
    [10] 王帅. 支持无历史建模的约束驱动技术研究[D]. 华中科技大学, 2013.Wang Shuai. Research of Constraint-driven Technology for History-independent Shape Modeling[D]. Huazhong University of Science and Technology, 2013
    [11] 陈振明, 张耀林, 黄冬平. Tekla Structure软件在CCTV主楼钢结构深化设计中的应用[J]. 施工技术, 2008, (08): 73-74.Zhenming C, Yaolin Z, Dongping H. Application of Tekla Structure Software on Steel Structure Detail Design in CCTV Main Building [J]. Construction Technology. 2008;8:034.
    [12] Owolabi A., Anumba C. J., El-Hamalawi A., et al. Development of an industry foundation classes assembly viewer[J]. Journal Of Computing In Civil Engineering, 2006, 20(2): 121-131.
    [13] IFC Official Website[EB/OL]. http://www.buildingsmart-tech.org/specifications.
    [14] Kassem M., Dawood N., Chavada R. Construction workspace management within an Industry Foundation Class-Compliant 4D tool[J]. Automation In Construction, 2015, 52: 42-58.
    [15] Seo J., Kim I. Industry Foundation Classes-Based Approach for Managing and Using the Design Model and Planning Information in the Architectural Design[J]. Journal Of Asian Architecture And Building Engineering, 2009, 8(2): 431-438.
    [16] Hou X. Y., Lu X. L., Ieee. Automatic design of transmission lines using ObjectARX technology[M]. New York: Ieee, 2012: 581-585.
    Related
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation

MAN Yanlei, WU Jie, ZHANG Qilin, ZHU Yanxin. Research and Development of OperationBased Parametric Modeling System for Joints of Steel Structures[J].同济大学学报(自然科学版),2019,47(09):1225~1234

Copy
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:September 18,2018
  • Revised:August 02,2019
  • Adopted:April 15,2019
  • Online: September 29,2019
Article QR Code