Structure Design and Process Planning aor Additive Manufacturing

doi:10.11908/j.issn.0253-374x.19393

Home > Archive>Volume 48, Issue 6, 2020 >869-879. DOI:10.11908/j.issn.0253-374x.19393

Structure Design and Process Planning aor Additive Manufacturing
DOI:
                        10.11908/j.issn.0253-374x.19393
                    
CSTR:
                        [cstr]
                    
Author:
                        WANG Yu1WANG Yu
Sino-German College of Applied Sciences, Tongji University, Shanghai201804, China
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
1

Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
LI Shuaishuai2LI Shuaishuai
School of Mechanical Engineering, Tongji University, Shanghai201804, China
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
2

Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
YU Ying2YU Ying
School of Mechanical Engineering, Tongji University, Shanghai201804, China
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
2

Find this author on All Journals
Find this author on BaiDu
Search for this author on this site

                    
Affiliation:1.Sino-German College of Applied Sciences, Tongji University, Shanghai201804, China;2.School of Mechanical Engineering, Tongji University, Shanghai201804, China
Clc Number:TH122
Fund Project:

Article

Figures

Metrics

Reference [71]

Related [20]

Cited by

Materials

Comments

Abstract:

Systematically discusses the state-of-the-art research of parts design for additive manufacturing from the aspects of structure design with topology optimization, mesoscopic structure, parts integration, fluid pipeline and heat exchanger, and the aspects of process planning with toolpaths, buliding direction, multi-axis construction and curved layers. On this basis, AM parts integration design, multi-scale heterogeneous cellular structure design, performance-oriented process planning and process planning for continuous carbon fiber reinforced composites as the potential development directions were proposed.

Key words:additive manufacturing;structure design;process planning

Reference

[1] DURAKOVIC B. Design for additive manufacturing: benefits, trends and challenges[J]. Periodicals of Engineering and Natural Sciences (PEN), 2018, 6(2): 179.

[2] VAYRE B, VIGNAT F, VILLENEUVE F. Designing for additive manufacturing[C]// The 45th CIRP Conference on Manufacturing Systems 2012. Athens: CIRP, 2012: 632-637.

[3] ZHANG Q, YANG X, LI P, et al. Bioinspired engineering of honeycomb structure―using nature to inspire human innovation[J]. Progress in Materials Science, 2015, 74: 332.

[4] GARDAN N, SCHNEIDER A. Topological optimization of internal patterns and support in additive manufacturing[J]. Journal of Manufacturing Systems, 2015, 37: 417.

[5] ESCHENAUER H A, OLHOFF N. Topology optimization of continuum structures: a review[J]. Applied Mechanics Reviews, 2001, 54(4): 331.

[6] 林鑫, 黄卫东. 应用于航空领域的金属高性能增材制造技术[J]. 中国材料进展, 2015 (9): 684.

[7] BEYER C. Strategic implications of current trends in additive manufacturing[J]. Journal of Manufacturing Science and Engineering, 2014, 136(6): 064701.

[8] the From 3D Printer into Space[EB/OL]. [2018-10-28]https://www.altair.com/NewsDetail.aspx?news_id=11062.

[9] ORME M E, GSCHWEITL M, FERRARI M, et al. Designing for additive manufacturing: lightweighting through topology optimization enables lunar spacecraft[J]. Journal of Mechanical Design, 2017, 139(10): 100905.

[10] TOMLIN M, MEYER J. Topology optimization of an additive layer manufactured (ALM) aerospace part[C]//Proceeding of the 7th Altair CAE Technology Conference. Troy: Altair Company, 2011: 1-9.

[11] GALJAARD S, HOFMAN S, REN S. New opportunities to optimize structural designs in metal by using additive manufacturing[C]//Advances in Architectural Geometry 2014. London: Springer, 2015: 79-93.

[12] Altair announce additive manufacturing partnership following 3D printed motorcycle project[EB/OL]. [2016-06-15].https://www.3ders.org/articles/20160615-airbus-apworks-altair-announce-additive-manufacturing-partnership-following-3d-printed-motorcycle-project.html.

[13] CANSIZOGLU O, HARRYSSON O L, WEST H A, et al. Applications of structural optimization in direct metal fabrication[J]. Rapid Prototyping Journal, 2008, 14(2): 114.

[14] GU X, ZHU J, ZHANG W. The lattice structure configuration design for stereolithography investment casting pattern using topology optimization[J]. Rapid Prototyping Journal, 2012, 18(5): 353.

[15] GAO T, ZHANG W. Topology optimization involving thermo-elastic stress loads[J]. Structural and multidisciplinary optimization, 2010, 42(5): 725.

[16] YANG L, HARRYSSON O, CORMIER D, et al. Additive manufacturing of metal cellular structures: design and fabrication[J]. Journal of Management, 2015, 67(3): 608.

[17] ZHENG X, LEE H, WEISGRABER T H, et al. Ultralight, ultrastiff mechanical metamaterials[J]. Science, 2014, 344(6190): 1373.

[18] CHU C, GRAF G, ROSEN D W. Design for additive manufacturing of cellular structures[J]. Computer-Aided Design and Applications, 2008, 5(5): 686.

[19] CHEN Y. 3D texture mapping for rapid manufacturing[J]. Computer-Aided Design and Applications, 2007, 4(6): 761.

[20] NGUYEN J, S-i PARK , ROSEN D. Heuristic optimization method for cellular structure design of light weight components[J]. International Journal of Precision Engineering and Manufacturing, 2013, 14(6): 1071.

[21] SANTER M, PELLEGRINO S. Topological optimization of compliant adaptive wing structure[J]. AIAA Journal, 2009, 47(3): 523.

[22] YAN C, HAO L, HUSSEIN A, et al. Evaluations of cellular lattice structures manufactured using selective laser melting[J]. International Journal of Machine Tools and Manufacture, 2012, 62: 32.

[23] Rigid Vibration Absorption Now a Reality[EB/OL]. [2019-02-05].3d printingindustry.com/news/rigid-vibration-absorption-now-reality-90650/.

[24] The Orthopaedic industry is reinventing itself through the use of Additive Manufacturing[EB/OL]. [2019-03-25].http://www.betaty.pe/services/.

[25] Lightweight Lattices Liberate New Product Performance[EB/OL].[2019-05-15].https://altairenlighten.com/opinion/lightweight-lattices-liberate-new-product-performance/.

[26] DIAS M R, GUEDES J M, FLANAGAN C L, et al. Optimization of scaffold design for bone tissue engineering: a computational and experimental study[J]. Medical Engineering & Physics, 2014, 36(4): 448.

[27] Boeing has developed the lightest metal on earth[EB/OL]. [2019-04-14].https://inhabitat.com/boeing-and-hrl-win-guinness-world-record-for-worlds-lightest-metal/.

[28] TEUFELHART S. Investigation of the capability of flux of force oriented lattice structures for lightweight design[J]. Advanced Materials Research, 2014, 907: 75.

[29] YANG S, TANG Y, ZHAO Y F. A new part consolidation method to embrace the design freedom of additive manufacturing[J]. Journal of Manufacturing Processes, 2015, 20: 444.

[30] PRAKASH W N, SRIDHAR V, ANNAMALAI K. New product development by DFMA and rapid prototyping[J]. Journal of Engineering and Applied Sciences, 2014, 9(3): 274.

[31] The LEAP fuel nozzle[EB/OL]. [2019-05-01].https://www.ge.com/additive/industry/aerospace.

[32] MURR L E, GAYTAN S M, RAMIREZ D A, et al. Metal fabrication by additive manufacturing using laser and electron beam melting technologies[J]. Journal of Materials Science & Technology, 2012, 28(1): 1.

[33] MUELLER B. Additive manufacturing technologies―rapid prototyping to direct digital manufacturing[J]. Assembly Automation, 2012, 32(2).

[34] SCHMELZLE J, KLINE E V, DICKMAN C J, et al. (Re) Designing for part consolidation: understanding the challenges of metal additive manufacturing[J]. Journal of Mechanical Design, 2015, 137(11): 111404.

[35] CAMPBELL R I, JEE H, KIM Y S. Adding product value through additive manufacturing[C]// The 19th International Conference on Engineering Design. Seoul: Sungkyunkwan University ,2013: 259-268.

[36] BECKER R, GRZESIAK A. Innovative Developments in Design and Manufacturing[C]// Advanced Research in Virtual and Rapid Prototyping. Leiria: CRC Press, 2009:748-762.

[37] Hydraulic block manifold redesign for additive manufacturing[EB/OL].[2019-02-01]. https://www.renishaw.com/en/blog-post-minimal-manifolds-shedding-more-material-boosting-performance-38949.

[38] GARCIA M, GARCIA-PANDO C, MARTO C. Conformal cooling in moulds with special geometry[J]. Innovative developments in virtual and physical prototyping, 2011,58: 409.

[39] ALTAF K, MAJDI ABDUL RANI A, RAGHAVAN V R. Prototype production and experimental analysis for circular and profiled conformal cooling channels in aluminium filled epoxy injection mould tools[J]. Rapid Prototyping Journal, 2013, 19(4): 220.

[40] SETAKI F, TENPIERIK M, TURRIN M, et al. Acoustic absorbers by additive manufacturing[J]. Building and Environment, 2014, 72: 188.

[41] J-W CHOI , YAMASHITA M, SAKAKIBARA J, et al. Combined micro and macro additive manufacturing of a swirling flow coaxial phacoemulsifier sleeve with internal micro-vanes[J]. Biomedical Microdevices, 2010, 12(5): 875.

[42] DUPUIS P, CORMIER Y, FENECH M, et al. Heat transfer and flow structure characterization for pin fins produced by cold spray additive manufacturing[J]. International Journal of Heat and Mass Transfer, 2016, 98: 650.

[43] SALTZMAN D J, BICHNEVICIUS M, LYNCH S P, et al. Experimental comparison of a traditionally built versus additively manufactured aircraft heat exchanger[C]// 55th AIAA Aerospace Sciences Meeting. Grapevine: AIAA, 2017: 0902-0914.

[44] GARDE K. Design and manufacture of an oil cooler by additive manufacturing[D]. Minneapolis: University of Minnesota, 2017.

[45] Electric Superbike Twente and K3redesign D and 3D print cooling system[EB/OL]. [2019-03-01].https://www.3dprintingmedia.network/electric-superbike-twente-k3d-cooling-system/.

[46] HIETA uses renishaw metal 3d printer to take heat exchangers from prototyping to commercial production[EB/OL]. [2019-01-01].https://3dprint.com/198933/hieta-renishaw-heat-exchangers/

[47] RADERMACHER R, BACELLAR D, AUTE V, et al. Miniaturized Air-to-Refrigerant Heat Exchangers[R]. [S.l.]:University of Maryland , College Park , 2017.

[48] Additive world awards designed and 3D printed by Addlab[EB/OL]. [2019-05-08].http://addlab.com/News/Additive-world-awards-designed-and-3d-printed-by-addlab.

[49] JIN Y A, HE Y, FU J Z, et al. Optimization of tool-path generation for material extrusion-based additive manufacturing technology[J]. Additive Manufacturing, 2014(1): 32.

[50] GANTENBEIN S, MASANIA K, WOIGK W, et al. Three-dimensional printing of hierarchical liquid-crystal-polymer structures[J]. Nature, 2018, 561(7722): 226.

[51] GARDAN J, MAKKE A, RECHO N. A method to improve the fracture toughness using 3D printing by extrusion deposition[J]. Procedia Structural Integrity, 2016, 2: 144.

[52] STEUBEN J C, ILIOPOULOS A P, MICHOPOULOS J G. Implicit slicing for functionally tailored additive manufacturing[J]. Computer-Aided Design, 2016, 77: 107.

[53] WANG Y, CHEN Z, LI H, et al. Theory and methodology for high-performance material-extrusion additive manufacturing under the guidance of force-flow[C]// Solid Freeform Fabrication ：Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference. Austin: University of Austin, 2018: 2063-2073.

[54] LUCA D. Design and manufacture of optimized continuous composite fiber filament using additive manufacturing systems[J]. Journal of Material Sciences & Engineering, 2017, 6(4): 1000363.

[55] MATSUZAKI R, UEDA M, NAMIKI M, et al. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation[J]. Scientific Reports, 2016, 6: 23058.

[56] MA T, GAO H L, CONG H P, et al. A bioinspired interface design for improving the strength and electrical conductivity of graphene‐based fibers[J]. Advanced materials, 2018, 30(15): 1706435.

[57] TAM K M M , MUELLER C T, COLEMAN J R, et al. Stress line additive manufacturing (slam) for 2.5-d shells[J]. Journal of the International Association for Shell and Spatial Structures, 2016, 57(4): 249.

[58] DUTY C E, FAILLA J A, KIM S, et al. Reducing mechanical anisotropy in extrusion-based printed parts[C]// Solid Freeform Fabrication : Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium ―—An Additive Manufacturing Conference. Austin: University of Austin, 2017: 1602-1612.

[59] KLAHN C, SINGER D, MEBOLDT M. Design guidelines for additive manufactured snap-fit joints[J]. Procedia CIRP, 2016, 50: 264.

[60] HAMBALI R H, SMITH P, RENNIE A. Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis[J]. International Journal of Materials Engineering Innovation, 2012, 3(3-4): 269.

[61] YERAZUNIS W S, BARNWELL III J C, NIKOVSKI D N. Strengthening ABS, nylon, and polyester 3D printed parts by stress tensor aligned deposition paths and Five-Axis printing[C]. Solid Freeform Fabrication: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference2016: 1259.

[62] K-M M TAM , MUELLER C T. Additive manufacturing along principal stress lines[J]. 3D Printing and Additive Manufacturing, 2017, 4(2): 63.

[63] WU C, DAI C, FANG G, et al. RoboFDM: A robotic system for support-free fabrication using FDM[C]// 2017 IEEE International Conference on Robotics and Automation (ICRA). [S.l]:IEEE,2017: 1175-1180.

[64] ISHAK I, FISHER J, LAROCHELLE P. Robot arm platform for additive manufacturing: Multi-plane printing[C]// Proceedings of the 2016 Florida Conference on Recent Advances in Robotics. Miami: FCRAR, 2016:146-151.

[65] SONG P, FU Z, LIU L, et al. Printing 3D objects with interlocking parts[J]. Computer Aided Geometric Design, 2015, 35: 137.

[66] TANG Y, LOH H T, J-Y-H FUH, et al. Segmentation of dimensionally-large rapid prototyping objects[J].Innovation in Manufacturing Systems and Technology, 2003, 10(2): 101.

[67] GUAN H W, SAVALANI M M, GIBSON I, et al. Influence of fill gap on flexural strength of parts fabricated by curved layer fused deposition modeling[J]. Procedia Technology, 2015, 20: 243.

[68] KHURANA J B, SIMPSON T W, FRECKER M. Structurally intelligent 3d layer generation for active-z printing[C]// Solid Freeform Fabrication : Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium —An Additive Manufacturing Conference. Austin: University of Austin, 2018: 2413-2423.

[69] LLEWELLYN J T, ALLEN R, TRASK R. Curved layer fused filament fabrication using automated toolpath generation[J]. 3D Printing and Additive Manufacturing, 2016, 3(4): 236.

[70] MCCAW J C, CUAN U E. Curved-layered additive manufacturing of non-planar, parametric lattice structures[J]. Materials & Design, 2018, 160: 949.

[71] HUANG B, SINGAMNENI S. A mixed-layer approach combining both flat and curved layer slicing for fused deposition modelling[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015, 229(12): 2238.

Get Citation

WANG Yu, LI Shuaishuai, YU Ying. Structure Design and Process Planning aor Additive Manufacturing[J].同济大学学报(自然科学版),2020,48(6):869~879

Copy

Article Metrics

Abstract:580
PDF: 1854
HTML: 791
Cited by: 0

History

Received:September 23,2019
Revised:May 20,2020
Adopted:March 17,2020
Online: July 09,2020
Published:

Get Citation

Share

Article Metrics

History

Article QR Code